Best Gas Lawn Edger Reviews | Buyer’s Guide

Maintaining your yard is straightforward with the proper tools, that’s why you’re seeking out a garden edger. Not simplest will it assist you to create a neat appearance around your property, it’s going to reduce the time spent on weekly maintenance so you don’t just use the weed trimmer every unmarried time you mow the lawn.

Edgers aren’t a replacement idea: Back within the 1940s, the primary gasoline garden edger was invented, a Briggs and Stratton 1.5-horsepower engine. Since then, edgers have changed and even have many capabilities that help make caring to your yard an entire lot easier.

For crisp, smooth edges round along your driveway, sidewalks, and garden beds, a reliable edger may be a must. That’s why we created this reviews list of the highest eight lawn edgers, so you’ll find an appropriate machine, and our buyer’s guide will permit you to know what things to preserve in mind when checking out the fine edger.

Southland SWLE0799 79cc Walk Behind Gas Lawn Edgerbest gas lawn edger

Get the professional landscaping look without paying the expert charge using the Southland Lawn Edger. The edger is prepared with a 79cc OHV engine that grants a powerful 3.5 foot-pounds of torque. Starting the edger is easy and quick due to the guide recoil clean start. the three 9 inch triangular blades are often adjusted to five one-of-a-kind intensity positions to reach a cutting maximum of two .five inch. 

The blade can also be adjusted 15 degrees left or right for bevelled edging. No want to conflict with those tough spots around the diminish, adjustable the front and rear wheels offer a shrink hopping potential to unexpectedly locomote those tough edges. The strong metal frame and blade guard confirm the potential to shield your edger for something your yard throws its way. 

The Southland garden edger is simple to assemble, runs quietly, and might address those intricate edging spots leaving your garden searching professionally manicured. The Southland lawn edger is backed by employing a 2 yr restrained warranty* and is EPA and CARB certified.

This gadget is made with sturdiness in mind, with its metal body and blade protect, but it’s miles nonetheless lightweight enough to manoeuvre around the backyard because of the actual fact it best weighs 64.8 kilos. Other pleasant features are the bevel adjustment, so as that you’re going to reduce at distinct angles, and thus the cut down-hopping capability, which suggests you’ll extend the surface wheels to trim alongside deeper curbs.


  • Manual recoil easy start gasoline delivery system
  • Adjustable to five depth positions up to 2 ½-inch deep
  • Blade perspective adjusts 15 stages for bevel edging capabilities
  • Metal body and blade protection for increased durability
  • Triangular three-factor blade
  • Fuel the stabilizer if the edger is kept unused for 30 days.

Remington RM2510 Curved Shaft Gas String Edger

best gas edger trimmer

The lightweight Remington RM2510 Rustler trimmer features a 25cc 2-cycle engine with QuickStart technology, which reduces the attempt it takes to tug begin the engine. The ergonomic curved shaft design makes it easy to trim small to medium yards with less fatigue. 

The 16-inch cutting swath and twin line bump head make it smooth to trim a good location of grass no end to refill trimmer line. Replace the trimmer line effectively with the help of tapping the slicing head on the bottom at an equivalent time as operating. Backed via 2-12 months confined warranty.

Remington has hard-working trimmers that will help you gain a well-manicured garden with minimal attempt. The Remington Rustler trimmers are perfect for small to medium-sized yards. The Rustler's are light-weight, powerful, and clean-to-use. 

The RM2510 Curved Shaft trimmer gives optimal comfort whilst slicing, and an immediate view of the cutting line while operating. Break natures will with a Remington String Trimmer.


  • 25CC GAS ENGINE: QuickStart generation Engine to make pull begins easier.
  • CURVED SHAFT: Curved shaft layout makes reducing and trimming components of your lawn more snug and balanced.
  • DUAL LINE PUMP HEAD: Avoid interrupting your yard job! Simply tap the head on the ground to feed greater line to your trimmer.
  • 1/2 line: Thicker line for extra sturdiness and greater manipulate getting those thicker patches of grass and shrubs.
  • 16-INCH CUTTING SWATH: Trims wider sections of tall grass in less time.Spark Plug Gap:. 0.1/2 inch

McLane 101-5.5GT Gas Powered Lawn Edger

gas powered edger lowes

This lawn edger system by McLane offers many desirable functions that make it the head of the category. it’s 4 ball-bearing wheels with extensive rubber tires, so it’s optimal lower trimming. We like that the edger could even be adjusted to trim vertically or horizontally which the blade is commonly tilted to almost any perspective and trim flat at any height.

It gives 5.50 gross torque and a 3.five HP B&S engine, so it’s even more energy than the Southland. The accommodate and blade cowl is made of metal, and this method uses an unmarried-lever blade snatch to manage the depth manipulate so as that you will achieve the precise cut. The 9-inch spring blade is likewise long-lasting and makes smooth and simple cuts.

The McLane could also be a steeply-priced option, but it’s made within the U.S.A. And meets all protection standards. it’s simple to assemble and consumer-friendly.


  • EDGER AND TRIMMER – Make your yard or out of doors area look terrific with this garden edger gadget. McLane bladed edgers and trimmers use unmarried lever blade clutch and depth control for the precise cut you’d like.
  • PRECISE – This motorized trimmer is supposed to trip on maximum curbs while still delivering a smooth cut whenever. The cutter head is precision machined uses sealed precision ball bearings on a 2” x 9” spring metal blade.
  • ANY ANGLE – McLane edgers and trimmers reduce vertically or horizontally and appear the hay smoothly thanks to wide rubber tires with ball bearing wheels. The blade could even be quickly and simply tilted to simply about any perspective and can trim flat at any height.
  • MEET SAFETY STANDARDS – All McLane edger and trimmers meet all established protection standards.

CRAFTSMAN E405 Gas Powered Grass Lawn Edger

walk behind gas edger

The Craftsman CMXGKAME29A fuel edger is the easiest way to position the finishing edge on your lawn. The 29cc, 4-cycle no mixing fuel and oil engine is mounted on a metallic frame, so you don’t get to use a trimmer or convey the greater weight. It capabilities a 9-inch dual-tip steel blade which can split to 1. seventy-five inches thorough.  

The edger is usually raised and reduced with six top positions and is prepared with advanced 2-step beginning to simplify commencing to just the highest and pull. it is a totally moulded ergonomic lookout of design with throttle and idle controls for straightforward operation. The three premium shipping wheels offer added balance and control. 4-cycle oil is protected with purchase for your convenience. The CMXGKAME29A is backed by means of a 2-12 months limit.


  • Greater power with much less vibration: 29cc, 4-cycle engine is robust and produces much less noise without the requirement to mix gas and oil!
  • Easy 2-step start: advanced smooth begin technology simplifies starts to 2 steps: Prime and pull.
  • Ergonomic cater to the layout: Fully moulded ergonomic manage comes with a mounted throttle and Idle controls for fewer complicated operation.
  • HEAVY-DUTY STEEL BLADE AND ADJUSTABLE CUTTING HEIGHT: Heavy responsibility 9-inch dual-tipped metallic blade cuts a clean edge alongside driveways and sidewalks. make a choice from 6 different cutting positions the most amount as 1. seventy-five inches.
  • three transport wheels: designed with three premium shipping wheels for added stability and control

Troy-Bilt TB516 Wheeled Edger with JumpStart Technology

best walk behind gas edger

The Troy-Bilt TB516 EC edger is the best manner to position the finishing near your lawn. The 4-cycle no blend oil and heat engine are attached on a metal frame, so you don’t want to use a trimmer or convey the more weight. It capabilities a 9-inch dual-tip steel blade that might hack to 2.5 inches thorough. The edger could even be raised and lowered with six height positions and is backed by way of a two-yr warranty. Don’t accept much but best, the TB516 EC will upload a smooth edge whenever. 

The lightweight and maneuverable Troy-Bilt Wheeled Edger is true for cutting a easy edge alongside driveways, walks, or even garden beds. Featuring a 29cc 4-cycle engine, the Wheeled Edger features a heavy-obligation 9-inch dual-tipped metal blade that cuts a clean edge along any pathway and provides an edging intensity up to 1.75 inches. 

The Edger is commonly adjusted into 6 specific top positions, supplying a 2.5-inch reducing intensity. Designed with three premium delivery wheels to present the user balance and control whilst operating. The absolutely molded ergonomic house layout with handle attached throttle and idle controls for clean operation. The TB516 EC is prepared with SpringAssist Technology to produce you an clean begin with a clean consistent pull. 

Eliminate pull begins with the JumpStart engine started (engine starter sold separately). Backed by employing a 2-yr limited warranty, the Troy-Bilt TB516 EC Wheeled Edger gives you an appropriate manicured lawn


  • The TB516 EC 29cc 4-cycle premium engine requires no mixing fuel and oil
  • Equipped with Spring Assist Starting Technology, JumpStart capable affords an easy start with just a smooth and constant pull
  • The heavy-duty 9-inch dual-tipped metallic blade cuts an easy edge alongside driveways and sidewalks, edging with a 1.seventy five-inch max intensity
  • A completely-moulded foldable ergonomic take care of layout with a manage set up the throttle and idle controls makes for easy operation and smooth storage

Buyer’s Guide to Gas Edger

Features of an Edger

  • Type 

Pole single-wheel edgers: These are very the same as a weed trimmer or may also even be weed trimmers with an edger attachment option. they typically have two to three wheels to assist preserve balance, and so the engines are visiting be smaller with less power. they’re also lighter in weight and simpler to manoeuvre inside the tight regions of your yard. These are ideal for tiny to medium yards.

Walk-in the rear of edgers: The engine on these are large and greater powerful, with a purpose to handle larger yards and harder terrain. they’re going to be greater hard to manoeuvre around curves and tight spaces but will leave a clean, crisp cut.

  •  Engine Type and Size 

Four cycle engines are first-rate for heavy-obligation jobs, and also you don’t want to fear about blending the oil with the fuel. they’re heavier and greater high priced but extra environmentally pleasant. Two-cycle engines are incredible for light-duty paintings and are cheaper. On the bad side, they’re much less pleasant to the environment, and you’d wish to supply a combination of gasoline and oil for them to run

  • Blade 

A direct blade can do a pleasing hedging activity, however, there are different blades that might be a much better investment, looking forward to what you’d prefer to accomplish, especially if you have an edger that positions the blade at some of the angles.

  • Price 

The cost of the item is consistently at the forefront of the general public. try to discover one this can be often low cost for you however also affords the capabilities to urge the tactic done. If you opt for too cheap of a machine, you’ll store cash inside the beginning however remorse it later while you don’t find it irresistible or troubles arise.

  •  Warranty 

Spending a high-quality deal of cash on a yard device is hard sometimes, however, if it comes with an honest guarantee, this could help ease a variety of the burden. Before you get, educate yourself on what the reassurance covers so as that you’re tuned in to the professionals and cons.

error: Content is protected !!